Dornier Do 335 Pfiel
u m m a r y
||USD$7.95 (Add shipping and handling
to above: USD$4.00 in North America)
|Contents and Media:
in cream-coloured resin.
quality casting; hollowed stacks; accurate.
HyperScale is proudly supported by Squadron.com
latest set of replacement exhausts are for Tamiya's excellent 1/48 scale Dornier
Do 335 kits, Two sets of exhausts are supplied in the bag; one set for each
The exhausts will be suitable for either the single seat Do
335A-0/1 "Arrow", the two-seater Do 335A-12 "Anteater", or even for a "B"
conversion. It is important to note that each set of exhausts is different. The
pair for the rear engine feature a shrouded stack,
while the six stacks for each side of the front engine are unshrouded.
flattened exhausts are always more challenging for the modeler to drill out than
rounded pipes, so this style of hollow exhaust is especially welcome.
Each exhaust is attached to its
individual casting block via a thin strip of resin. This will be very simple to
remove with a few swipes of a scriber or a hobby knife.
Recommended for anyone building either of the Tamiya
1/48 scale Do 335s.
Thanks to Kevin at
Ultracast for the review samples.
The full catalogue of Ultracast accessories, conversions and figures may be
viewed and purchased at
Ultracast's Web Site.
Review Copyright © 2002 by
Images Courtesy Ultracast Website
Page Created 31 March, 2002
Last updated 22 July, 2003
Back to HyperScale Main Page
Back to Reviews Page